What to do if Astralpool Power Supply projectors change color or go out?
If the Astralpool Power Supply projectors change color or go out for a few moments, it may be due to a faulty power supply in the projectors or in the DMX modulator. Check the 24V DC power supply line of the projectors and the DMX modulator.
Why is the green LED in my Astralpool Lumiplus DMX DMX modulator not lighting up?
The green LED in the Astralpool Power Supply DMX modulator might not light up due to a defective DMX signal. To resolve this, check the installation of the DMX line, ensuring that only the line termination of the last DMX equipment of the DMX communications bus is activated.
How to fix Astralpool Lumiplus DMX Power Supply display if DMX address isn't showing?
If the display indicating the DMX address on your Astralpool Power Supply does not turn on, it suggests that current is not reaching the equipment. Check the mains socket (230 V~ac) and the 24V DC power line.
Details on connecting the 230V~AC power supply to terminals 29, 31, and 33.
Details on connecting the first DMX input/output using GND, +, and signal lines.
Details on connecting the second DMX input/output using GND, +, and signal lines.
General| Brand | Astralpool |
|---|---|
| Model | Lumiplus DMX |
| Category | Power Supply |
| Language | English |
To Next Page
