To Next PageTo Next Page
Need help?Do you have a question about the Astralpool SEL BLUE EVO and is the answer not in the manual?
General| Brand | Astralpool |
|---|---|
| Model | SEL BLUE EVO |
| Category | Water Filtration Systems |
| Language | English |
Adjustable chlorine production value (0-100%). Factory value 75%.
Water temperature adjustment for winter shutdown (5-20°C).
Water temperature adjustment for winter shutdown, stopping chlorine production.
Displays measured pH, warnings about value variations, checking pH range.
Option to deactivate pH regulation or activate it with pH kit.
Adjustment of pH setting (6.8~7.5), factory setting 7.3.
Recommended calibration upon installation and yearly verification.
ORP sensor usage for measuring oxidation reduction potential and adjusting chlorine.
Option to deactivate ORP regulation for maintenance or manual adjustment.
Adjustment of ORP setting (400-750mV), factory setting 700mV.
Calibration process for ORP sensors, verification yearly.
Feature for maximum production level (100%) for 24 hours.
Parameter to reduce chlorine production with an automatic cover.
Feature to test pH pump, electrolysis, and cover panel.
Parameter to indicate exact pool volume for accuracy and pH regulation.
Displays active alarms, provides specific information on each alarm.
Restores factory-set values for all user parameters.
Cleaning, winter shutdown, and handling of pH/ORP sensors.
Handling, cleaning, and scale removal for the electrode.
Flushing the vessel to prevent frost/freezing.
Common issue with causes and solutions like filter cleaning, water balance.
Issues with pH/ORP readings and their potential causes/solutions.
Problems encountered during sensor calibration and solutions.
Slow sensor responses, causes, and potential solutions.
