What to do if the display is blank on my Astralpool Water Filtration System?
If your Astralpool Water Filtration System displays a blank screen, there could be a couple of reasons. First, check that the controller is properly plugged in and that there is mains power available. If it is plugged in, the fuse might have blown. In that case, replace the fuse with a 3 amp slow blow fuse.
Why is there low or no chlorine production in my Astralpool Water Filtration System?
If your Astralpool Water Filtration System isn't producing enough chlorine, several factors could be the cause. Here's what you can check: * Ensure all cables are correctly connected to the cell. * Increase the timer period if it's too short. * Increase the chlorine output level. * Backwash the filter. * Correct the pH level if it's too high. * Ensure the pool stabilizer is between 30 and 60 ppm. * Increase the salt level to above 4000ppm if it's too low.
How to fix no flow in Astralpool SALT EXPERT-3 Water Filtration Systems?
If you're experiencing no flow in your Astralpool Water Filtration System, start by checking if the pump is turned off or disconnected, or if any valves are closed. Make sure the valves are open and the pump is on. Also, verify that the blue sense wire is connected to the cell.
General| Brand | Astralpool |
|---|---|
| Model | SALT EXPERT-3 |
| Category | Water Filtration Systems |
| Language | English |
Instructions for mounting the control unit in a ventilated, outdoor location.
Guidelines for correctly installing the chlorinator cell in the pipework.
Setting the clock, day, and operating timers for the chlorinator.
Adjusting chlorine production levels and activating safety backwash.
Selecting Pool (Auto, On, Standby/Off) or Spa modes for operation.
Interpreting indicators like low salt, no flow, and chlorine production.
Instructions to set the current time and day on the chlorinator.
How to configure up to four different operating periods for the chlorinator.
Details the functions of the Increase/Decrease arrows and display.
Shows the set level and indicates performance compared to LEDs.
Explains Auto, On, and Standby/Off settings for pool operation.
How to activate Spa mode and turn on the pump.
Auto, On, and Standby/Off settings for pool operation.
Activating Spa mode and turning on the pump.
Indicates low salt concentration requiring replenishment.
Signals that no water flow is detected by the chlorinator.
How LEDs and LCD show set and actual output levels.
The target chlorine output level indicated by the LED lights.
Step-by-step instructions for filter backwashing and rinsing.
Guidance on priming the pump and ensuring water flow on initial startup.
Actions to take if the pump switches off due to no water flow.
Recommendations for daily run times based on season and checking chlorine levels.
Importance of stabiliser and recommended levels for maintaining chlorine effectiveness.
Ideal pH ranges for different pool types.
Recommended range for total alkalinity in pool water.
Importance of salt level for cell life and operation, and recommended levels.
Instructions for manual cleaning of the chlorinator cell.
Step-by-step guide for cleaning the cell using acid or a cleaning solution.
Fault: No flow. Cause: Pump off/valves closed. Remedy: Ensure pump/valves on.
Fault: Low salt indication. Cause: Low salt/temp. Remedy: Check salt level/section 3.5.
Fault: Display blank. Cause: No power/fuse blown. Remedy: Check power/replace fuse.
Fault: Low/No chlorine. Cause: Cables/timer/output/filter/pH/stabiliser/salt. Remedy: Check connections/adjust settings/backwash.
Fault: Clock loses time. Cause: Battery life expired. Remedy: Call technician.
Fault: No flow. Cause: Pump off/valves closed. Remedy: Ensure pump/valves on.
Fault: Low salt indication. Cause: Low salt/temp. Remedy: Check salt level/section 3.5.
Fault: Display blank. Cause: No power/fuse blown. Remedy: Check power/replace fuse.
Fault: Low/No chlorine. Cause: Cables/timer/output/filter/pH/stabiliser/salt. Remedy: Check connections/adjust settings/backwash.
Fault: Clock loses time. Cause: Battery life expired. Remedy: Call technician.
Covers warranty period, seller's guarantee, and repair/replacement policy.
Clarifies that replaced/repaired parts do not extend the original warranty term.
Details causes like incorrect salinity, pH, or temperatures that void the warranty.
To Next Page
