To Next PageTo Next PageWhy won't my Astralpool VICTORIA PLUS start?
If your Astralpool Swimming Pool Pump won't start, it could be due to an inverted motor turning or wrong voltage. To resolve this, invert 2 power phases. Also, check the voltage on the characteristics plate and ensure it matches that of the mains.
Why is the motor of my Astralpool Swimming Pool Pump stopped?
If the motor of your Astralpool Swimming Pool Pump is stopped, it could be due to increased temperature in the terminal box caused by an electric arc, the thermal protection tripping, or incorrect terminal box connections. Check the terminal box connections. Connect the cables correctly to the terminal boxes. Also, tighten the cable correctly to the terminal and adapt the size of the cable connection to the terminal box.
Why does my Astralpool VICTORIA PLUS Swimming Pool Pump make a noise?
If your Astralpool Swimming Pool Pump is making a noise, it might be because the pump is incorrectly secured. Secure the pump correctly to resolve this issue.
What to do if my Astralpool VICTORIA PLUS Swimming Pool Pump releases only a small flow of water?
If your Astralpool Swimming Pool Pump is only releasing a small flow of water, this could be due to a blocked pre-filter or load loss in the installation. Try cleaning the filter. Additionally, prevent parts from causing load loss wherever possible.
General| Model | VICTORIA PLUS |
|---|---|
| Category | Swimming Pool Pump |
| Voltage | 230 V |
| Protection | IP55 |
| Pump Type | Centrifugal |
| Frequency | 50 Hz |
| Connection | 2" |
| Insulation Class | F |
| Inlet/Outlet Size | 2" |
| Weight | Depends on model |
| Material | Plastic |
Instructions for qualified personnel regarding assembly, electrical work, and general user safety.
Guidelines on who can use the appliance and the necessity of supervision.
Warnings about electrical hazards and consequences of non-compliance.
Warnings about potential physical injury or damage to property.
Caution regarding potential damage to the pump or installation due to non-compliance.
Rules for installation, modifications, power disconnection, and contacting support.
Precautions for junction box connections, seals, and preventing water entry.
Checks required before starting the machine, focusing on protection devices.
Guidelines for safe assembly, maintenance, and handling of moving parts.
Essential electrical connection requirements, including disconnection devices and cabling.
Causes and solutions for the pump not priming or failing to start.
Diagrams defining Zones 0, 1, and 2 for safe pump installation.
