What to do if my Astralpool VICTORIA PLUS SILENT will not start?
If your Astralpool Swimming Pool Pump won't start, there are a few things to check. First, make sure the voltage matches what's on the rating plate and the mains. Second, the pre-filter may be blocked and needs cleaning.
Why has the motor stopped on my Astralpool VICTORIA PLUS SILENT?
If the motor of your Astralpool Swimming Pool Pump has stopped, check the junction box connections, as increased temperature due to an electric arc may be the cause. If the thermal protection trips, connect the cables correctly to the junction boxes. Incorrect junction box connections can also cause this issue; tighten the cable correctly or adapt the cable connection size to the junction box.
What to do if my Astralpool VICTORIA PLUS SILENT motor is making a noise but will not start?
If your Astralpool Swimming Pool Pump motor is making noise but won't start, it could be due to load loss in the installation; prevent parts from causing load loss wherever possible. Ensure the pump is correctly secured. If the motor is blocked, remove it and contact the technical service.
Failure to follow these instructions may lead to the risk of electrocution.
Failure to follow these instructions may lead to injury or property damage.
Failure to follow these instructions may lead to damage to the pump or installation.
General guidelines for pool pump installation and assembly, including compliance and fitting.
Instructions for connecting piping, ensuring proper seals, perpendicularity, and slope.
Guidance on optimal pump placement relative to water level and ventilation.
Pre-start-up checks including filling the pre-filter and verifying motor rotation direction.
Steps to initiate pump operation, including opening valves and activating self-priming.
General| Brand | Astralpool |
|---|---|
| Model | VICTORIA PLUS SILENT |
| Category | Swimming Pool Pump |
| Language | English |
To Next Page
