To Next PageTo Next Page
Need help?Do you have a question about the Astralpool Viron eQuilibrium Salt Chlorinator and is the answer not in the manual?
General| Model | Viron eQuilibrium |
|---|---|
| Type | Salt Chlorinator |
| Brand | Astralpool |
| Control | Digital |
| pH Control | Optional |
| ORP Control | Optional |
| Salt Level | 4000 ppm |
| Salt Concentration | 3.0 - 6.0 g/L |
| Power Supply | 220-240V, 50Hz |
| Cell Type | Titanium |
| Warranty | 3 years |
| Flow Rate | Minimum 2 m³/h |
Details the 'INSTALL' mode for initial setup, including pump speed, volume, and system configuration.
Describes the steps to initiate and perform the pH calibration process using a calibration solution.
Guides the user on how to adjust the chlorine output level and set point of the pool.
Details how to adjust the pH set point for optimal pool water balance.
Explains the installation process for the optional pH sensor and its mixing cell.
Describes the installation of the chlorine sensor for automatic control of chlorine levels.
Lists the necessary equipment required for the Viron e-Quilibrium to operate in Ai Mode.
Describes how the Viron e-Quilibrium operates automatically in Ai Mode to manage pool functions.
