Thank you for purchasing the True RMS 2000 Counts CLAMP
METER from AstroAI. The AstroAI True RMS Digital CLAMP
METER is designed to be safely and accurately used by
professionals and weekend DIYer's alike. This manual
provides all safety information, operation instruction,
specifications, and maintenance for the meter. The instrument
performs AC Current AC/DC Voltage, Resistance, Audible
Continuity Testing, Diode Testing, NCV Detection, and
Capacitance Testing. Thank you again for choosing AstroAl, if
you have any questions or concerns regarding your product,
please contact us at support@astroai.com.
NOTE: Fully read and understand this manual before using
this Digital CLAMP METER, if you are a beginner to
multimeters, please read and keep this manual for reference
WARNING
To avoid possible electric shocks or personal injury, and to
avoid possible damage to the Meter or to the equipment being
tested, adhere to the following rules :
• Use the Meter strictly in accordance with this manual,
otherwise the protection function provided by the Meter may
be damaged or weakened
• Please be especially careful when measuring over 60V DC,
30V AC RMS or 42V peak value as there is a danger of an
electric shock.
• Do not apply more than the rated voltage, as marked on the
Meter, between the terminals or between any terminal and
grounding
• Check whether the Meter is working normally by measuring
the known voltage, do not use it if the readings are incorrect
or the Meter is damaged
• Use the Meter according to the measurement category,
voltage or current rating specified on the meter or manual
-3
To Next Page
Loading...
