OTHER FUNCTIONS AND FEATURES
Auto Shut Off:
• After 15 of standby, the Meter will automatically turn off. To
turn it on again, just rotate the range switch or press a
button.
• Remove Auto Off: When the multimeter is off, press and
hold the "FUNC" button, and then turn the rotary dial until
the meter beeps. The "APO" icon on the screen will
disappear, which means the auto shut off function is
cancelled. It will be restored again after restarting.
Replacing Batteries:
• If the low battery sign appears on the LCD display, the battery
should be replaced. Remove the rubber cover and the screws
on the back cover, replace the exhausted battery with fresh
batteries. (Size AAA, I .5V x2).
• NOTE: Replace batteries immediately to prevent inaccurate
readings due to the low power. This also prevents potential
safety hazards.
Replacing Fuses:
Fuses rarely need to be replaced and are usually blown due to
operator error. To replace the fuses:
• Disconnect the test leads.
• Remove the rubber sleeve and the screws on the back
cover of the Meter.
• Open the back of the Meter and replace with fuses of the
same rating.
It is crucial that the replacement fuses have the same rating:
• Fuse I: F400mA/250V fuse,5mmX20mm.
• Fuse 2: FIOA/250V fuse,5mmX20mm.
-8
To Next Page
Loading...
