Astrosyn P808 User Manual

User Manual
Model P808
High Performance Microstepping Driver
Astrosyn International Technology Ltd, The Old Courthouse, New Rd Ave, Chatham, Kent ME4 6BE, England
Tel: +44(0)1634 815175 Fax: +44(0)1634 826552

Astrosyn P808 Specifications

General

Brand	Astrosyn
Model	P808
Category	Control Unit
Language	English

Summary

General

Specifications and Operating Environment

Driver Connectors, P1 and P2

Control Signal Connector P1 pins

Defines the function of each pin on the P1 control signal connector.

Power connector P2 pins

Details the pin assignments for the P2 power connector.

Power Supply Selection

Driver Voltage and Current Selection

Selecting Supply Voltage

Guidance on choosing the appropriate DC supply voltage for optimal performance.

Setting Proper Output Current

Instructions for setting the output current for motor torque and heating.

Microstep Resolution and Driver Current Output

Microstep Resolution Selection

How to set microstep resolution using DIP switches SW5-SW8.

Current Setting

Using DIP switches SW1-SW3 to set dynamic current during motion.

Control Signal Connector (P1) Interface

Driver Connection to Stepper Motors

Connection Diagram

Control Signal Waveform and Timing

Dimensions