3
/
15
1.3 Definitions and Symbols
Information of manufacture, including
name and address
When the end-user wishes to discard
this product, it must be sent to separate
collection facilities for recovery and
recycling
Information of EU
authorized representative
The information you should
know to protect the
equipment from possible
damage
Anti-dust & Anti-water class
The important information
you should know
The information you should know to protect patients and medical staff from possible
injury
If a Pulse Oximeter Monitor is not provided with a low SpO2 ALARM CONDITION, a
statement to the effect “NoSpO2 Alarms” or Symbol IEC 60417‐5319
(DB‐2002‐10) (see IEC 60601‐1‐8:2006 +AMD1:2012,TableC.1, Symbol 3).
*Batch code, Date of manufacturer and Serial No are printed on the label on the battery cover.
CAUTION: Keep the operating environment free of dust, vibrations, corrosive, or
flammable materials, and extremes of temperature and humidity.
CAUTION: Do not operate the unit if it is damp or wet because of condensation or
spills. Avoid using the equipment immediately after moving it from a cold
environment to a warm, humid location.
CAUTION: Never use sharp or pointed objects to operate the front-panel switches.
CAUTION: The batteries must be taken out from the battery compartment if the
device will not be used for a long time.
CAUTION: The device shall only be used if the battery cover is closed.
CAUTION: The batteries must be proper disposed according to local regulation after
their use.
CAUTION: The device should keep away from the children, pets and pests to avoid
swallowing.
To Next Page
Loading...