EasyManua.ls Logo

ASTS Enterprises A310 - Cleaning and Disinfection Procedures; Cleaning Procedures; Disinfection Procedures

ASTS Enterprises A310
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
/
15
Note:
1. When battery power is at lowest level, the battery capacity indicates symbol of in OLED,
remind users of replacement of battery.
2. The plethymogram can been regarded as correct if the wave is fluctuated regularly.
Section 4 Cleaning and Disinfection
4.1 Cleaning
Switch off the power and take out the batteries before cleaning.
Keep the exterior surface of the device clean and free of dust and dirt. Cleaning exterior surface
(OLED display screen included) of the unit with a dry and soft cloth. Use 75% density of medical
alcohol to clean the surface and use dry fabric with little alcohol to avoid alcohol permeates into the
device.
4.2 Disinfection
Disinfect the machine after using by the patient if multiple patient uses the machine in the
hospital.
Use 75% density of medical alcohol to clean the surface that contacting with the patient.
CAUTION: Don’t use strong solvent. For example, acetone.
CAUTION: Never use an abrasive such as steel wool or metal polish.
CAUTION: Do not allow any liquid into the product, and do not immerse any parts of the
device into any liquids.
CAUTION: Avoid pouring liquids on the device while cleaning.
CAUTION: Don’t remain any cleaning solution on the surface of the device.