What to do if oxyhemoglobin or heart rate is shown unstably on ASTS Enterprises Medical Equipment?
If the oxyhemoglobin or heart rate readings are unstable, the finger may not be inserted deeply enough into the device, or the finger is trembling, or the patient is moving. Try reinserting the finger more securely. Ensure the patient remains still and calm during measurement.
How to fix if oxyhemoglobin or heart rate can not be shown normally on ASTS Enterprises Medical Equipment?
If the oxyhemoglobin or heart rate cannot be displayed normally, it may be due to incorrect finger placement or the patient's perfusion being too low for accurate measurement. Ensure the finger is correctly inserted into the device. If the issue persists, attempt the measurement several more times.
General| Brand | ASTS Enterprises |
|---|---|
| Model | A310 |
| Category | Medical Equipment |
| Language | English |
Instructions for safe operation, self-servicing, site changes, ambient light, interference, patient conditions, nail polish, temperature acclimatization, and sterilization.
Warnings related to EMC, flammable atmospheres, battery disposal, MRI/CT use, modification, and inspection.
Explains various symbols used in the manual, including equipment type, manufacturer info, temperature limits, disposal, follow manual, IP rating, warning, caution, and notes.
Provides a general overview, intended use, and brief description of the A310 Pulse Oximeter.
Lists key features like portability, adjustable display, color OLED, low perfusion capability, reminders, low battery indicator, auto-off, and battery life.
Details the expected service life of the equipment and its accessories, including shelf life considerations.
Identifies front panel parts and explains the OLED display after switching on the device.
Describes how to enter the menu page to adjust settings like sound reminder, beep, demo, restore, and brightness.
Details configuring sound reminders, beeps, demo, and setting high/low limits for SpO2 and PR values.
Covers battery installation, powering on, reading data, and OLED display rotation modes.
Instructions for cleaning the exterior surface of the Pulse Oximeter using a soft cloth and medical alcohol.
Guidelines for disinfecting the machine after use in a hospital setting, using 75% medical alcohol.
Covers timely battery replacement, cleaning, storage conditions, and regular inspection for damage.
Lists common problems like no reading, unstable reading, abnormal readings, no power, and screen turning off, with possible reasons and resolutions.
Declares compliance with electromagnetic emission standards (CISPR 11) for use in domestic and commercial environments.
Provides guidance on electromagnetic immunity, covering ESD, transient, surge, and voltage variations for typical environments.
Details electromagnetic immunity requirements for conducted RF and radiated RF, including recommended separation distances.
Provides recommended separation distances for RF equipment based on transmitter power and frequency.
Instructions on proper disposal of the infrared thermometer and batteries according to environmental regulations.
Details the two-year manufacturer's guarantee, terms, conditions, and contact information for Australia.
To Next Page