ASUNA 7700 - Assembly Instructions; Step 1: Attaching Main Frame and Running Board; Step 2: Attaching Tablet Bracket

STEP 1:
Make sure the area on the floor is clear.
Hold the position A of
Main Frame (No.
1), then pull the
Three-In-One Bolt (No.
13) to release the Running Board
(No.
19). Slowly lower the Running Board
(No. 19) to the floor.
STEP 2:
Assemble Tablet Bracket (No. 45)
with 2
Washers (No. 42) and 2 Screws (No. 46)
.
Tighten and secure using Allen Wrench
(No. 47).
Note:
The treadmill must be lubricated
before first use. See page 8 for lubrication
instructions.
The assembly is complete!
Assembly Instructions