3-42 Chapter 3: BIOS setup
3.8.3 ASUS O.C. Prole
This item allows you to store or load multiple BIOS settings.
Add Your CMOS Prole.
Allows you to save the current BIOS le to the BIOS Flash. In the Name sub-item,
type your prole name and press <Enter>, and then choose a prole number to
save your CMOS settings in the Save To sub-item. You can save two (2) CMOS
proles.
Load CMOS Prole.
Allows you to load the previous BIOS settings saved in the BIOS Flash. Press
<Enter>, and choose a prole to load.
Start O.C. Prole
Allows you to run the utility to save and load CMOS. Press <Enter> to run the
utility.
ASUSTek O.C. Prole Utility V1.30
Current CMOS
Restore CMOS
A:
Note
[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [Esc] Exit
PATH: A:\
BOARD: P6T Deluxe V2
VER: 0309
DATE: 09/15/2008
BOARD: Unknown
VER: Unknown
DATE: Unknown
• This function can support devices such as a USB ash disk or a oppy disk
with FAT 32/16 format and single partition only.
• DO NOT shut down or reset the system while updating the BIOS to prevent
the system boot failure!
BIOS SETUP UTILITY
Tools
O.C. PROFILE Conguration
O.C. Prole 1 Status : Default-Prole
O.C. Prole 2 Status : Default-Prole
Add Your CMOS Prole.
Name : [Default-Prole]
Save To : [Uninstalled]
Load CMOS Prole.
Load From : [Blank]
Start O.C. Prole
Save BIOS settings
to Prole 1
To Next Page
Loading...
Need help?
General
