Asus A88X PRO - Using the AMD VISION Engine Control Center

5-6
Chapter 5: Multiple GPU technology support
Chapter 5
5.2.4 Using the AMD
®
VISION Engine Control Center
Install a graphics card onto your motherboard. Refer to the User Guide that comes with your
graphics card for details. The add-on graphics card is set to be the main monitor as default.
If you are using both an add-on and the on-board graphics cards at the same time and want
to set the onboard graphics card as your main monitor, follow the instructions below.
1. Right-click on the Windows
®
desktop and select AMD VISION Engine Control Center.
2. In the AMD VISION Engine Control Center
window, click Performance > AMD
Radeon™ Dual Graphics, then select
Disable AMD Radeon Dual Graphics.
Click Apply.
3. From the next screen, select the desktop
you want to congure from the drop-down
list. Click Apply.
4. Click
Performance > AMD Radeon™ Dual Graphics, then select Enable AMD
Radeon Dual Graphics. Click Apply. The onboard graphics card is set to be the main
monitor.