Asus A88X PRO - Page 95

ASUS A88X-PRO
3-23
Chapter 3
Q-Fan Max. Duty Cycle(%) [100]
Use the <+> and <-> keys to adjust the maximum CPU fan duty cycle. The
values range from 20% to 100%. When the CPU temperature reaches the
upper limit, the CPU fan will operate at the maximum duty cycle.
Q-Fan Lower Temperature [20]
Displays the lower limit of the CPU temperature.
Q-Fan Min. Duty Cycle(%) [20]
Use the <+> and <-> keys to adjust the minimum CPU fan duty cycle. The
values range from 0% to 100%. When the CPU temperature is under 40ºC, the
CPU fan will operate at the minimum duty cycle.
CHA_FAN1/2/3/4 Q-Fan Control [Disabled]
[Disabled] Disables the Chassis Q-Fan control feature.
[Enabled] Enables the Chassis Q-Fan control feature.
CHA_FAN1/2/3/4 Fan Speed Low Limit [600 RPM]
This item appears only when you enable the CHA_FAN1/2/3/4 Q-Fan Control feature and
allows you to disable or set the CHA_FAN1/2/3/4 fan warning speed. Conguration options:
[Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]
CHA_FAN1/2/3/4 Fan Profile [Standard]
This item appears only when you enable the CHA_FAN1/2/3/4 Q-Fan Control feature
and allows you to set the appropriate performance level of the CHA_FAN1/2/3/4 fan.
[Standard] Sets to [Standard] to make the chassis fan automatically adjust
depending on the chassis temperature.
[Silent] Sets to [Silent] to minimize the fan speed for quiet chassis fan
operation.
[Turbo] Sets to [Turbo] to achieve maximum chassis fan speed.
[Manual] Sets to [Manual] to assign detailed fan speed control parameters.
The following four items appear only when you set CHA_FAN1/2/3/4 Fan Prole to
[Manual].
CHA_FAN1/2/3/4 Upper Temperature [70]
Use the <+> and <-> keys to adjust the upper limit of the chassis temperature.
The values range from 40ºC to 90ºC.