ASUS CUSL2 User’s Manual 21
3. HARDWARE SETUP
Motherboard Settings
3. H/W SETUP
5) Voltage I/O Setting (VIO)
This jumper allows you to select the voltage supplied to the DRAM, chipset,
AGP, and PCI. The default setting of 3.40V should be used unless processor
overclocking requires a higher voltage.
Setting VIO
3.30 V [1-2]
3.40 V [2-3] (default)
3.60 V [3-4]
CUSL2 VIO Setting
VIO
3.30 V 3.40 V
12
2
3
3.60 V
3
4
CUSL2
®
WARNING! Using a higher voltage may help when overclocking but may result
in the shortening of your computer component’s life. It is highly recommended
that you leave this setting on its default.
To Next Page
Loading...
Need help?
General
