5-2
Chapter 5: Software support
5.2.2 Drivers menu
The drivers menu shows the available device drivers if the system detects
installed devices. Install the necessary drivers to activate the devices.
NVIDIA nForce driver
This item installs the NVIDIA
®
nForce2 drivers.
Silicon Image Serial ATA driver
This item displays the step-by-step installation information of the Silicon
Image Serial ATA driver for various operating systems.
Marvell Gigabit LAN Driver
This item installs the Marvell
®
Gigabit LAN driver for gigabit LAN solution
that provides up to 1000Mbps data transfer rates.
USB 2.0 Driver
This item installs the USB 2.0 driver to upgrade your USB 1.1 ports to USB
2.0.
Silicon Image Serial ATA Utility
This item installs the software utility to monitor.
A. For Windows 98SE users, perform the following steps before
installing the NVIDIA nForce Drivers from support CD.
1. Create a new directory in your root directory (C:\) and name it
Win98SRC.
2. Copy all the files (excluding sub-directories) from the \Win98
folder of your Windows 98SE CD to the C:\Win98SRC folder.
To Next Page
Loading...
