EasyManua.ls Logo

Asus DELUXE P5LD2 - Page 94

Asus DELUXE P5LD2
156 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4-304-30
4-304-30
4-30
Chapter 4: BIOS setupChapter 4: BIOS setup
Chapter 4: BIOS setupChapter 4: BIOS setup
Chapter 4: BIOS setup
Silicon 3132 Controller [SATA2 Mode]Silicon 3132 Controller [SATA2 Mode]
Silicon 3132 Controller [SATA2 Mode]Silicon 3132 Controller [SATA2 Mode]
Silicon 3132 Controller [SATA2 Mode]
Allows you to set the onboard Silicon Image SATA RAID controller mode.
Configuration options: [SATA2 Mode] [RAID Mode] [Disabled]
ITE8211F Controller [Enabled]ITE8211F Controller [Enabled]
ITE8211F Controller [Enabled]ITE8211F Controller [Enabled]
ITE8211F Controller [Enabled]
Allows you to enable or disable the onboard ITE
®
8211F IDE controller.
Configuration options: [Disabled] [Enabled]
Detecting Device Time [Quick Mode]
Sets the time the ITE8211F IDE RAID controller detects devices
connected to the IDE RAID connectors.
Configuration options: [Standard Mode] [Quick Mode]
Serial Port1 Address [3F8/IRQ4]Serial Port1 Address [3F8/IRQ4]
Serial Port1 Address [3F8/IRQ4]Serial Port1 Address [3F8/IRQ4]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [3E8/IRQ4] [2E8/IRQ3]
Parallel Port Address [378]Parallel Port Address [378]
Parallel Port Address [378]Parallel Port Address [378]
Parallel Port Address [378]
Allows you to select the Parallel Port base addresses.
Configuration options: [Disabled] [378] [278] [3BC]
Parallel Port Mode [ECP]Parallel Port Mode [ECP]
Parallel Port Mode [ECP]Parallel Port Mode [ECP]
Parallel Port Mode [ECP]
Allows you to select the Parallel Port mode.
Configuration options: [Normal] [Bi-directional] [EPP] [ECP]
ECP Mode DMA Channel [DMA3]ECP Mode DMA Channel [DMA3]
ECP Mode DMA Channel [DMA3]ECP Mode DMA Channel [DMA3]
ECP Mode DMA Channel [DMA3]
Appears only when the Parallel Port Mode is set to [ECP]. This item
allows you to set the Parallel Port ECP DMA.
Configuration options: [DMA0] [DMA1] [DMA3]
Parallel Port IRQ [IRQ7]
Configuration options: [IRQ5] [IRQ7]
Onboard Game/MIDI Port [Disabled]Onboard Game/MIDI Port [Disabled]
Onboard Game/MIDI Port [Disabled]Onboard Game/MIDI Port [Disabled]
Onboard Game/MIDI Port [Disabled]
Allows you to select the Game Port address or to disable the port.
Configuration options: [Disabled] [200/300] [200/330] [208/300]
[208/330]

Table of Contents

Related product manuals