77
4.7 Administration
4.7.1 System
The System page allows you to configure your xDSL modem
router settings.
To set up the System settings:
1. From the navigation panel, go to Advanced Settings >
Administration > System tab.
2. You can configure the following settings:
• Change router login password: You can change the
password and login name for the xDSL modem router by
entering a new name and password.
• WPS button behavior: The physical WPS button on the
xDSL modem router can be used to activate WPS.
• Time Zone: Select the time zone for your network.
• NTP Server: The xDSL modem router can access a NTP
(Network time Protocol) server in order to synchronize the
time.
• Enable Telnet: Click Ye s to enable Telnet services on the
network. Click No to disable Telnet.
• Authentication Method: You can select HTTP, HTTPS, or
both protocols to secure router access.
• Enable Web Access from WAN: Select Ye s to allow devices
outside the network to access the xDSL modem router GUI
settings. Select No to to prevent access.
3. Click Apply.
To Next Page
Loading...
Need help?
General
