Quick Use Guide - 2
Powering on your Eee PC
These are only quick instructions for using your Eee PC. Read the full
manual for detailed information.
1. Install the battery pack
2. Connect the AC power
adapter
3. Turn ON the Eee PC
Remember to fully charge
the battery before first
use and whenever it
is depleted to prolong
battery life.
Status Indicators
Status indicators represent various hardware/software conditions.
Power Indicator
Battery Charge Indicator
Solid State disk (SSD) Indicator
Wireless Indicator
When you open the
display panel, do not
force it down to the table
or else the hinges may
break! Never lift the Eee
PC by the display panel!
To Next Page
Loading...
