ASUS ExpertWiFi EBM68
AX7800 Tri Band WiFi Router
Model: EBM68
Quick
Start Guide
1
Plug the adapter into the DCIN port, and press the power switch.
2
The power LED will light up when your hardware is ready.
Hardware Explanations
EBM68 Overview
2.5G / 1G WAN port
Connect your optical modem to this
port with a network cable.
LAN ports 1-3
Connect your PC to a LAN port with a
network cable.
Before Setup
ASUS ExpertWiFi App
AiMesh Setup Steps
Troubleshooting
1
Find two EBM68, and power both on.
2
Use a network cable to connect your optical modem to the WAN port of EBM68 (with a
removable plastic strip). This EBM68 will be the AiMesh router, and the other EBM68 will be
the AiMesh node.
3
The LED turns solid blue to indicate that EBM68 is ready for setup.
Preparing to set up an AiMesh WiFi system
AiMesh router
AiMesh Setup Steps
AiMesh node
Download free ASUS ExpertWiFi App to set up and
manage your router(s).
AiMesh router
AiMesh node
Prepare
01
Place your AiMesh router and node in the same room
and at least 1-3 meters apartduring the setup process.
AiMesh node
02
Keep your AiMesh node powered on and standby for
AiMesh system settings.
Launch ASUS ExpertWiFi App, and then follow the on-
screen instructions to nish the AiMesh setup.
Launching ASUS ExpertWiFi App
03
If your AiMesh router cannot nd any AiMesh node nearby or synchronization fails, please check the following and try again.
a
Move your AiMesh node closer to the AiMesh router ideally. Ensure that it is within 1-3 meters.
b
Your AiMesh node is powered on.
DC Power adapter DC Output: +12V with max 3A current
Operating Temperature 0~40
o
C Storage 0~70
o
C
Operating Humidity 50~90% Storage 20~90%
Specications:
NOTE: When you’re using a wireless backhaul to connect your router and AiMesh node,
the WAN port on your AiMesh node can be used as a LAN port providing up to 2.5G
transmission speed.
Power switch
DCIN port
2.5G / 1G WAN port
LAN ports 1-3
USB 3.2 Gen
1x1
At least
1-3 meters
https://asus.click/asusexpertwia https://asus.click/asusexpertwii