Asus H170I-PLUS D3 - Page 26

1-16
Chapter 1: Product introduction
2. USB 3.0 connector (20-1 pin USB3_12)
ThisconnectorallowsyoutoconnectaUSB3.0moduleforadditionalUSB3.0front
orrearpanelports.WithaninstalledUSB3.0module,youcanenjoyallthebenetsof
USB3.0includingfasterdatatransferspeedsofupto4.8Gbps,fasterchargingtimefor
USB-chargeabledevices,optimizedpowerefciency,andbackwardcompatibilitywith
USB2.0.
• TheUSB3.0moduleispurchasedseparately.
• TheseconnectorsarebasedonxHCIspecication.Werecommendyoutoinstallthe
relateddrivertofullyusetheUSB3.0portsunderWindows
®
7.
3. USB 2.0 connectors (10-1 pin USB910, USB1112)
TheseconnectorsareforUSB2.0ports.ConnecttheUSBmodulecabletothese
connectors,theninstallthemoduletoaslotopeningatthebackofthesystemchassis.
TheseUSBconnectorscomplywithUSB2.0specicationthatsupportsupto480
Mbpsconnectionspeed.
Neverconnecta1394cabletotheUSBconnector.Doingsowilldamagethemotherboard!
TheUSB2.0moduleispurchasedseparately.
H170I-PLUS D3
H170I-PLUS D3 USB2.0 connectors
PIN 1
NC
GND
USB_P9+
USB_P9-
USB+5V
GND
USB_P10+
USB_P10-
USB+5V
USB910
PIN 1
NC
GND
USB_P11+
USB_P11-
USB+5V
GND
USB_P12+
USB_P12-
USB+5V
USB1112
H170I-PLUS D3
H170I-PLUS D3 USB3.0 connector
USB3_12
USB3+5V
IntA_P1_SSRX-
IntA_P1_SSRX+
IntA_P1_SSTX-
GND
IntA_P1_SSTX+
GND
IntA_P1_D-
IntA_P1_D+
GND
PIN 1
USB3+5V
IntA_P2_SSRX-
IntA_P2_SSRX+
GND
IntA_P2_SSTX-
IntA_P2_SSTX+
GND
IntA_P2_D-
IntA_P2_D+