Asus H170I-PLUS D3 - Page 57

CPU Graphics Switching Frequency [Auto] / CPU Graphics [Auto]
This item affects the GT transient response speed and the component thermal production.
Select [Manual] to congure a higher frequency for a quicker transient response speed.
Conguration options: [Auto] [Manual]
DO NOT remove the thermal module. The thermal conditions should be monitored.
The following item appears only when you set the CPU Graphics Switching Frequency to
[Manual].
Fixed CPU Graphics Switching Frequency (KHz) [250]
This item allows you to set a higher frequency for a quicker transient response speed.
Use the <+> and <‑> keys to adjust the value. The values range from 300KHz to
600KHz with a 50KHz interval.
CPU Graphics Power Duty Control [T.Probe]
DIGI+ VRM Duty Control adjusts the current and thermal conditions of every component’s
phase.
[T.Probe] Select to maintain the VRM thermal balance.
[Extreme] Select to maintain the current VRM balance.
CPU Graphics Power Phase Control [Auto]
This item allows you to set the power phase control of the CPU. Conguration options: [Auto]
[Standard] [Optimized] [Extreme] [Power Phase Response]
DO NOT remove the thermal module when setting this item to [Power Phase Response].
The thermal conditions should be monitored.
The following item appears only when you set the CPU Power Phase Control to [Power
Phase Response].
Power Phase Response [Fast]
This item allows you to set a faster phase response for the CPU to increase system
performance or to slower phase response to decrease DRAM power efciency.
Conguration options: [Ultra Fast] [Fast] [Medium] [Regular]
2.5.10 Internal CPU Power Management
The subitems in this menu allow you to set the CPU ratio and their features.
Intel
®
SpeedStep [Enabled]
This item allows the operating system to dynamically adjust the processor voltage and cores
frequency, resulting to a decreased average power consumption and decreased average
heat production. Conguration options: [Disabled] [Enabled]
ASUS H170I-PLUS D3 2‑23