Asus M2N-E SLI - Onboard Device Configuration

ASUS M2N-E SLI 4-27
4.4.5 Onboard Device Configuration
IDE Function Setup
This item in this sub-menu allows you to enable or disable IDE functions.
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select Sub-menu F10: Save and Exit
Select Menu
Item Specic Help
Onboard Device Conguration
IDE Funtion Setup
NVRAID Conguration
USB Conguration
Onboard nVidia LAN [Enabled]
Onboard LAN Boot ROM [Disabled]
Onboard USB Audio [Enabled]
Onboard 1394 [Enabled]
Serial Port1 Address [3F8/IRQ4]
Parallel Port Address [378/IRQ7]
Parallel Port Mode [EPP]
x ECP Mode Use DMA 3
Phoenix-Award BIOS CMOS Setup Utility
Advanced
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select Sub-menu F10: Save and Exit
Select Menu
Item Specic Help
IDE Function Setup
OnChip IDE Channel0 [Enabled]
OnChip IDE Channel1 [Enabled]
IDE DMA transfer access [Enabled]
SATA Port 1,2 [Enabled]
SATA DMA transfer [Enabled]
SATA Port 3,4 [Enabled]
SATA2 DMA transfer [Enabled]
IDE Prefetch Mode [Enabled]
Phoenix-Award BIOS CMOS Setup Utility
Advanced
OnChip IDE Channel0[Enabled]
Allows to disable or enable OnChip IDE Channel0
Conguration options: [Disabled] [Enabled]
OnChip IDE Channel1[Enabled]
Allows to disable or enable OnChip IDE Channel1
Conguration options: [Disabled] [Enabled]
IDE DMA transfer access[Enabled]
Allows to disable or enable IDE DMA transfer access
Conguration options: [Disabled] [Enabled]