9. Serial port connectors (10-1 pin COM1)
The connector is for a serial (COM) port. Connect the serial port module
cable to the connector, then install the module to a slot opening at the back of
the system chassis.
10. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that
end of the front panel audio I/O module cable to this connector.
connector, make sure that theke sure that the Front Panel Select item in the BIOS is set
you want to connect an an front panel audio module to
this connector, set the item to [AC97]. See page 2-29 for details. See page 2-29 for details.
The serial port bracket (COM1) is purchased separately.
To Next Page
Loading...
