Asus M2NPV-VM - Page 38

1-26 Chapter 1: Product introduction
3. Keyboard power (3-pin KBPWR)
This jumper allows you to enable or disable the keyboard wake-up feature.
Set this jumper to pins 2-3 (+5VSB) to wake up the computer when you press
a key on the keyboard (the default is the Space Bar). This feature requires an
ATX power supply that can supply at least 500 mA on the +5VSB lead, and a
corresponding setting in the BIOS.
M2NPV-VM
®
M2NPV-VM Keyboard power setting
KBPWR
1
2
2
3
+5V
(Default)
+5VSB