Asus M2NPV-VM - Chapter 2: BIOS setup

ASUS M2NPV-VM 1-33
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
7. USB connectors (10-1 pin USB56, USB78)
These connectors are for USB 2.0 ports. Connect the USB module cable
to any of these connectors, then install the module to a slot opening at the
back of the system chassis. These USB connectors comply with USB 2.0
specication that supports up to 480 Mbps connection speed.
8. Optical drive audio in connector (4-pin CD)
These connectors allow you to receive stereo audio input from sound sources
such as a CD-ROM, TV tuner, or MPEG card.
The USB 2.0 module is purchased separately.
M2NPV-VM
®
M2NPV-VM USB 2.0 connectors
USB56
USB+5V USB_P6- USB_P6+ GND NC
USB+5V
USB_P5-
USB_P5+
GND
1
USB78
USB+5V USB_P8- USB_P8+ GND NC
USB+5V
USB_P7-
USB_P7+
GND
1
M2NPV-VM
®
M2NPV-VM Internal audio connector
CD
(black)
Right Audio Channel
Left Audio Channel
Ground Ground