Asus M2NPV-VM - Page 71

ASUS M2NPV-VM 2-21
The following item becomes user-congurable when you set AI Tuning to [AI
Overclocking].
Overclock Options [Disabled]
Allows you to set the overclocking options.
Conguration options: [Disabled] [Overclock 3%] [Overclock 5%] [Overclock 8%]
[Overclock 10%]
The following items become user-congurable when you set AI Tuning to
[Manual].
CPU Frequency [XXX] (value is auto-detected)
Indicates the frequency sent by the clock generator to the system bus and PCI
bus. The bus frequency (external frequency) multiplied by the bus multiple equals
the CPU speed. The BIOS auto-detects the value of this item. The values range
from 200.0 to 400.0.
Setting a very high CPU frequency may cause the system to become unstable.
If this happens, revert to the default setting.
DDR2 Voltage Control [Auto]
Allows you to set the operating DDR2 voltage.
Conguration options: [Auto] [1.9V]
CPU Multiplier [Auto]
Allows you to set the operating CPU multiplier. The conguration options may vary
depending on the type of CPU installed. Conguration options: [Auto] [5x] [5.5x]
[6x] ~ [12x]