Asus M2S-X - Memory Configuration

华硕 M2S-X 主板用户手册 2-21
NorthBridge SiS756/761 Configuration
NorthBridgeSiS756/761Conguration
PrimaryGraphicsAdapter [PCIExpressCard]
Primary Graphics Adapter [PCI Express Card]
本项目可让您选择哪个图形控制器用来作为首选启动设备。
设置值有: [PCI Expres Card] [PCI]
Memory Controller
MemoryConguration
ECCConguration
Power Down Control [Auto]
Alternate VID [Auto]
 MemoryCLK :667MHz
 CASLatency(Tcl) :5.0
 RAS/CASDelay(Trcd) :5CLK
 MinActiveRAS(Tras) :15CLK
 RowPrechargeTime(Trp):5CLK
 RAS/RASDelay(Trrd) :3CLK
 RowCycle(Trc) :21CLK
 AsynchronousLatency :5ns
Memory Controller
MemoryConguration
MemorySetting:333MHz-5.0-5-5-15-2T
Memclock Mode [Auto]
CAS Latency (CL) [Auto]
TRCD [Auto]
TRP [Auto]
TRAS [Auto]
Command Timing (2T mode) [Auto]
MCT Timing Mode [Auto]
Bank Interleaving [Auto]
Enable Clock to All DIMMs [Disabled]
MemClk Tristate C3/ATLVID [Disabled]
DQS Signal Training Control [Enabled]
Memory Hole Remapping [Enabled]
Memory Configuration