Asus M2V-TVM - PCI Pnp

ASUS M2V - T V M 2-23
2.4.5 PCI PnP
The PCI PnP menu items allow you to change the advanced settings for
PCI/PnP devices. The menu includes setting IRQ and DMA channel resources
for either PCI/PnP or legacy ISA devices, and setting the memory size block
for legacy ISA devices.
Take caution when changing the settings of the PCI PnP menu items.
Incorrecteldvaluescancausethesystemtomalfunction.
Advanced PCI/PnP Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
PlugAndPlayO/S [No]
PCILatencyTimer [64]
AllocateIRQtoPCIVGA  [Yes]
PaletteSnooping [Disabled]
IRQ-3assignedto [PCIDevice]
IRQ-4assignedto [PCIDevice]
IRQ-5assignedto [PCIDevice]
IRQ-7assignedto [PCIDevice]
IRQ-9assignedto [PCIDevice]
IRQ-10assignedto [PCIDevice]
IRQ-11assignedto [PCIDevice]
IRQ-14assignedto [PCIDevice]
IRQ-15assignedto [PCIDevice]
NO: Lets the BIOS
congureallthe
devices in the system.
YES: Lets the operating
systemcongurePlug
and Play (PnP) devices
not required for boot
if your system has a
Plug and Play operating
system.
Plug and Play O/S [No]
When set to [No], BIOS congures all the devices in the system. When
set to [Yes] and if you installed a Plug & Play operating system, the
operating system congures the Plug & Play devices not required for boot.
Conguration options: [No] [Yes]
PCI Latency Timer [64]
Allows you to select the value in units of PCI clocks for the PCI device
latency timer register. Conguration options: [32] [64] [96] [128] [160]
[192] [224] [248]
Allocate IRQ to PCI VGA [Yes]
When set to [Yes], BIOS assigns an IRQ to PCI VGA card if the card
requests for an IRQ. When set to [No], BIOS does not assign an IRQ to the
PCI VGA card even if requested. Conguration options: [Yes] [No]