Asus M3N-HT DELUXE - Security

4-38 Chapter 4: BIOS setup
4.6.6 Security
Select Menu
Item Specic Help
Security
Supervisor Password Clear
User Password Clear
Password Check [Setup]
Phoenix-Award BIOS CMOS Setup Utility
Boot
Supervisor Password
User Password

To set a password:
1. Select an item then press <Enter>.
2. Type in a password using a combination of a maximum of eight (8)
alpha-numeric characters, then press <Enter>.
 

Typematic Delay (Msec) [250]
Allows you to set the delay before keystrokes begin to repeat.

OS Select for DRAM > 64MB [Non-OS2]
Set this item to [OS2] only when you are running on an OS/2 operating system with

Full Screen LOGO [Enabled]
Allows you to enable or disable the full screen logo display feature.

Make sure that the above item is set to [Enabled] if you want to use the ASUS
MyLogo 3 feature.
Halt On [All Errors]
Allows you to set the error report type.

[All, But Disk/Key]