Asus M3N-HT DELUXE - Installing the Optional Fans

ASUS M3N-HT Deluxe Series
2-11
2.3.3 Installing the optional fans
Install the optional fan only if you are using a passive cooler or a water cooler.


1. Position the fan above the pipe
and heatsink assembly.
2. Fit the fan to the grooved edge of
the heatsink.
3. Carefully push down the fan until

connect the fan cable.
4. The photo shows the fan installed
on the motherboard.
• Plug the optional fan cable to the CHA_FAN1/2 connector on the
motherboard.
• Make sure the optional fan is installed correctly to prevent damage to the
fan and motherboard components.
Make sure that the ASUS logo
faces the CPU socket.