Asus M3N-HT DELUXE - Software Information and Applications

ASUS M3N-HT Deluxe Series 5-9
5.3 Software information


with the software application for more information.
5.3.1 ASUS MyLogo 2
™
The ASUS MyLogo 2
™

image that appears on screen during the Power-On Self-Tests (POST). The ASUS
MyLogo 2
™
is automatically installed when you install the ASUS Update utility from
the support DVD. See section “5.2.3 Utilities menu” for details.
To launch the ASUS MyLogo 2
™
:
1. Launch the ASUS Update utility. Refer to section “4.1.1 ASUS Update utility”
for details.
2. Select Options from the drop down menu, then click Next.
3. Check the option Launch MyLogo to replace system boot logo before
Next.
4. Select Update BIOSNext.
5. When prompted, locate the new
Next. The ASUS
MyLogo window appears.
6. From the left window pane, select the
folder that contains the image you
intend to use as your boot logo.
• Before using the ASUS MyLogo 2
™
, use the Award BIOS Flash utility to

from the ASUS website. See section 4.1.4 Updating the BIOS.
• Make sure that the BIOS item Full Screen Logo is set to [Enabled] if
you wish to use ASUS MyLogo 2. See section 4.6.5 Boot Settings
Conguration.
 
 