Asus M3N78 PRO - Motherboard - ATX - Hardware Monitor

ASUS M3N78 PRO 4-29
4.5.4 Hardware Monitor
The items in this sub-menu displays the hardware monitor values automatically
detected by the BIOS. It also allows you to change CPU Q-Fan feature-related
parameters. Select an item then press <Enter> to display the conguration options.
CPU Fan Type [DC]
Allows you to select the CPU fan type you installed on the motherboard.
Conguration options: [DC] [PWM]
• If you install a PWM (4-pin) fan but set this item to [DC], the fan you
installed may not work.
• If you install a DC (3-pin) fan but set this item to a [PWM], the Q-Fan
Control function will not work and the fan you install will always run at full
speed.
CPU Q-Fan Control [Disabled]
Allows you to enable or disable the CPU Q-Fan controller.
Conguration options: [Disabled] [Enabled]
The CPU Q-Fan Prole item becomes user-congurable when you enable the
CPU Q-Fan Control feature.
Select Menu
Item Specic Help
Press [Enter] to
enable or disable
Hardware Monitor
CPU Fan Type [DC]
CPU Q-Fan Control [Disabled]
CPU Q-Fan Prole Performance
Chassis Q-Fan Control [Disabled]
Chassis Q-Fan Prole Performance
Vcore Voltage [ 1.16V]
3.3V Voltage [ 3.31V]
5V Voltage [ 4.97V]
12V Voltage [11.96V]
CPU Temperature 39ºC
M/B Temperature 33ºC
CPU Fan Speed 2922 RPM
CHA_FAN1 Speed 0 RPM
PWR_FAN Speed 0 RPM
CPU Fan Speed Warning [800 RPM]
Phoenix-Award BIOS CMOS Setup Utility
Power
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select SubMenu F10: Save and Exit
Power Up By PS/2 Keyboard [Disabled]
Allows you to disable the Power On by PS/2 keyboard function or set specic keys
on the PS/2 keyboard to turn on the system. This feature requires an ATX power
supply that provides at least 1A on the +5VSB lead.
Conguration options: [Disabled] [Space Bar] [Ctrl-ESC] [Power Key]