Asus M3N78 SE - ASUS EZ Flash 2 Utility

ASUS M3N78 SE 2-3
To update the BIOS using EZ Flash 2:
1.
Insert the oppy disk / USB ash disk that contains the BIOS le to the oppy disk drive
or the USB port, then launch EZ Flash 2. You can launch EZ Flash 2 in two ways:
• Press
<Alt> + <F2> during POST to display the following.
2.1.3 ASUS EZ Flash 2 utility
The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go through the
long process of booting from a oppy disk or a DOS-based utility.
ASUSTek EZ Flash 2 BIOS ROM Utility V3.21
Current ROM
Update ROM
A:
Note
[Enter] Select or Load [Tab] Switch [V] Dri ve Info
[Up/Down/Home/End] Move [B] Backup [ESC] Exit
FLASH TYPE: MXIC 25L8005
PATH: A:\
BOARD: M3N78 SE
VER: 0204 (H:00 B:00)
DATE: 08/27/2008
BOARD: Unknown
VER: Unknown
DATE: Unknown
• This function can support devices such as USB ash disk, or oppy disk with FAT 32/16
format and single partition only.
• DO NOT shut down or reset the system while updating the BIOS to prevent
system boot failure!
2. When the correct BIOS le is found, EZ Flash 2 performs the BIOS update process
and automatically reboots the system when done.
• Enter BIOS setup program. Go to the
Tools menu to select EZ Flash2 and press
<Enter> to enable it.
Press <Tab> to switch drives until the correct BIOS le is found.
Download the lates BIOS le from the ASUS website at www.asus.com.