Asus M3N78 SE - Onboard Devices and PCI PnP Configuration

2-16 Chapter 2: BIOS information
SouthBridge Conguration
Primary Graphics Adapter [PCI VGA Card First]
Display Device Priority, from high to low. Conguration options: [PCI VGA Card First] [PCIE
VGA Card First]
PCIE 2.0 Support [Auto]
Allows you to enable or disable the PCIE 2.0 feature. Conguration options: [Disabled] [Auto]
AZALIA AUDIO [Enabled]
Allows you to enable or disable the HD audio mode. Conguration options: [Disabled]
[Enabled]
Front Panel Select [HD Audio]
Allows you to set HD Audio mode. Conguration options: [AC97] [HD Audio]
Onboard LAN [Enabled]
Allows you to set or disable the Onboard LAN. Conguration options: [Enabled] [Disabled]
OnBoard LAN Boot ROM [Disabled]
Allows you to enable or disable the OnBoard LAN Boot ROM.
Conguration options: [Enabled] [Disabled]
SouthBridge ACPI HPET TABLE [Enabled]
Allows you to enable or disable SouthBridge ACPI HPET TABLE.
Conguration options: [Disabled] [Enabled]
2.4.4 Onboard Devices Conguration
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Conguration options: [Disabled] [3F8/IRQ4][2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Parallel Port Address [378]
Allows you to select the Parallel Port base addresses.
Conguration options: [Disabled] [378] [278] [3BC]
Parallel Port Mode [Normal]
Allows you to select the Parallel Port mode. Conguration options: [Normal] [EPP] [ECP]
[EPP+ECP]
2.4.5 PCI PnP
The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices.
The menu includes setting IRQ and DMA channel resources for either PCI/PnP or legacy ISA
devices, and setting the memory size block for legacy ISA devices.
Take caution when changing the settings of the PCI PnP menu items. Incorrect eld values
can cause the system to malfunction.