EasyManua.ls Logo

Asus M4A78 - Page 51

Asus M4A78
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 2: BIOS setup 2-11
Memory Clock Mode [Auto]
Allows you to set the memory clock mode. Conguration options: [Auto] [Manual]
The following items appear only when the DRAM Timing Mode item is set to [DCT 0].
CAS# Latency [ Auto]
Allows you to set CAS# latency. Conguration options: [Auto] [3 CLK] [4 CLK] [5 CLK]
[6 CLK] [7 CLK DH_Only]
TRCD [ Auto]
Allows you to set TRCD. Conguration options: [3 CLK] [4 CLK] [5 CLK] [6 CLK] [Auto]
TRP [ Auto]
Allows you to set TRP. Conguration options: [3 CLK] [4 CLK] [5 CLK] [6 CLK] [Auto]
tRTP [ Auto]
Allows you to specify the read CAS# to percharge time.
Conguration options: [Auto] [2-4 CLK] [3-5 CLK]
TRAS [ Auto]
Allows you to set TRAS. Conguration options: [5 CLK] [6 CLK] [7 CLK] [8 CLK] [9
CLK] [10 CLK] [11 CLK] [12 CLK] [13 CLK] [14 CLK] [15 CLK] [16 CLK] [17 CLK] [18
CLK] [Auto]
TRC [ Auto]
Allows you to set TRC. Conguration options: [11 CLK] [12 CLK] [13 CLK] [14 CLK] [15
CLK] [16 CLK] [17 CLK] [18 CLK] [19 CLK] [20 CLK] [21 CLK] [22CLK] [23 CLK] [24
CLK] [25 CLK] [26 CLK] [Auto]
tWR [ Auto]
Allows you to specify when the last write is registered by the DRAM.
Conguration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK]
TRRD [ Auto]
Allows you to set TRRD. Conguration options: [2 CLK] [3 CLK] [4 CLK] [5 CLK] [Auto]
tRWTTO [ Auto]
Allows you to set tRWTTO. Conguration options: [Auto] [2 CLK] [3 CLK] [4 CLK] [5
CLK] [6 CLK] [7 CLK] [8 CLK] [9 CLK]
tWRRD [ Auto]
Allows you to specify the write to read delay when accessing different DRAMs.
Conguration options: [Auto] [0 CLK] [1 CLK] [2 CLK] [3 CLK]
tWTR [ Auto]
Allows you to specify the write to read delay when accessing the same DRAM.
Conguration options: [1 CLK] [2 CLK] [3 CLK] [Auto]
Memclock Value [200 MHz]
Allows you to set the Memclock value. Conguration options: [200 MHz] [266 MHz]
[333 MHz] [400 MHz]
DRAM Timing Mode [Auto]
Allows you to set the DRAM timing mode. Conguration options: [Auto] [DCT 0]
The following item appears only when the Memory clock mode item is set to [Manual].

Table of Contents

Related product manuals