ROG Maximus III Formula 3-11
The following two items do not appear when you set the Ai Overclock Tuner
item to [Auto].
3.3.7 BCLK Frequency [XXX]
Allows you to adjust the Internal Base Clock (BCLK). Use the <+> and <-> keys to
adjust the value. You can also type the desired value using the numeric keypad.
The values range from 80 to 500.
3.3.8 PCIE Frequency [XXX]
Allows you to set the PCI Express frequency. Use the <+> and <-> keys to adjust
the PCIE frequency. The values range from 100 to 200.
3.3.9 QPI Frequency [Auto]
3.3.10 DRAM Frequency [Auto]
Allows you to set the DDR3 operating frequency.
3.3.11 DRAM Timing Control
depending on the
DIMMs you install on the motherboard.
1st Information: 6-6-6-15-4-36-6-5-16
The values vary depending on your settings of the following sub-items:
DRAM CAS# Latency [Auto]
Clock] [11 DRAM Clock]
DRAM RAS# to CAS# Delay [Auto]
Clock] [10 DRAM Clock]
DRAM RAS# PRE Time [Auto]
Clock] [10 DRAM Clock]
DRAM RAS# ACT Time [Auto]
Clock] [31 DRAM Clock]
DRAM RAS# to RAS# Delay [Auto]
To Next Page
Loading...
