Asus MAXIMUSII/FORMULA - Maximus II Formula Motherboard - Fan Speed Control

3-36 Chapter 4: BIOS setup
Select Screen
Select Item
+- Change Field
F1 General Help
F10 Save and Exit
ESC Exit
CPU Q-Fan Control [Disabled]
Chassis Q-Fan Control [Disabled]
POWER FAN Control [Disabled]
OPTFan1 Control [Disabled] [Disabled]
OPTFan2 Control [Disabled]
OPTFan3 Control [Disabled]
CPU Q-Fan Control
BIOS SETUP UTILITY
Power
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
CPU Q-Fan Control [Disabled]
Allows you to enable or disable the CPU Q-fan control feature.
Conguration options: [Disabled] [Enabled]
The following item appears when you enable CPU Q-Fan Control.
CPU Fan Prole [Standard]
Allows you to set the appropriate performance level of the ASUS Q-Fan. When
set to [Standard], the CPU fan automatically adjusts depending on the CPU
temperature. Set this item to [Silent] to minimize fan speed for quiet CPU fan
operation, or [Turbo] to achieve maximum CPU fan speed. Conguration options:
[Standard] [Silent] [Turbo]
OPT FAN1/2/3 overheat protection [90ºC]
Allows you to set the temperature over which the system automatically shuts
down when any of the thermal sensor cables connected to the motherboard
detects device overheat to protect the device from damage.
Conguration options: [Disabled] [70ºC] [80ºC] [90ºC]
Fan Speed Monitor
CPU Fan, Chassis Fan1/2/3, POWER Fan, OPT Fan1/2/3 Speed [xxxxRPM]
or [Ignored] / [N/A]
The onboard hardware monitor automatically detects and displays the CPU
fan, chassis fan, power fan, and optional fan speed in rotations per minute
(RPM). If any of the fans is not connected to the motherboard, the eld shows
0. These items are not user-congurable.
Fan Speed Control