Asus MAXIMUSII/FORMULA - Maximus II Formula Motherboard - Installing Q-Shield and LCD Poster

2-38 Chapter 2: Hardware information
3. Thread the LCD Poster cable
through the opening until its
stopper snaps into place.
4. Plug the LCD Poster cable into
the onboard connector labeled
LCD_CON.
2.8.3 Installing Q-shield and LCD Poster
1. Install the Q-shield to the chassis
by snapping it in place from inside.
2. Orient the motherboard and install
it to the chassis. Make sure that the
motherboard external ports t the
shield openings.
5. Place the LCD Poster on the
chassis or to wherever you like.