Asus MX279 Series - Image Settings Configuration

3-5
ASUS LCD Monitor MX279HE Series
4. Image
You can adjust the image Sharpness, Trace Free, Aspect Control,
VividPixel, ASCR, Adaptive-Sync, Position, Focus, and Auto Adjust in
this menu.
Image
Sharpness
VividPixel
ASCR
Adaptive-Sync
Position
Focus
Auto Adjust
Trace Free
Aspect Control
Standard Mode HDMI-1 1920 x 1080 @ 60Hz
ASUS MX279
• Sharpness: Adjust the picture sharpness. The adjusting range
is from 0 to 100.
• Trace Free: Speed up the response time by Over Drive
technology. The adjusting range is from lower 0 to faster 100.
• Aspect Control: Adjust the aspect ratio to “Full”, “4:3”, or
“OverScan”.
• 4:3 is only available when the input source is in 4:3 format.
• OverScan is only available for HDMI input.
• VividPixel: ASUS Exclusive Technology that brings lifelike
visuals for crystal-clear and detail-oriented enjoyment. The
adjustingrangeisfrom0~100.
• ASCR: Select ON or OFF to enable or disable dynamic contrast
ratio function.
• Adaptive-Sync: Select ON or OFF to enable or disable
the dynamic refresh rate range from 40Hz to 60Hz through
DisplayPort stream 1.2.
• Position: Adjust the horizontal position (H-Position) and the
vertical position (V-Position) of the image. The adjusting range is
from 0 to 100 (only available for VGA input).