Asus MX27A Series - Monitor Setup and Adjustment; Detaching the Monitor Base

2-1
Chapter 2: Setup
2.1 Detaching the base
To detach the base, perform the following:
1. Disconnect power and signal cables. Carefully put the front of the
monitor face down on a clean table.
2. Useyourngerstoloosenthescrewlocatedatthebottomofthe
base, and remove the base from the stand.
3. Or, you may directly use a screwdriver to remove the screw that
secures the base to the stand, and detach the base from the stand.
• We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
• Hold the base while removing the screw.