Asus P4S533 User Manual

ASUS P4S533 motherboard user guide 57
4.3.1 Primary & Secondary Master/Slave
Type [Auto]
Select [Auto] to automatically detect an IDE hard disk drive. If automatic
detection is successful, Setup automatically fills in the correct values for
the remaining fields on this sub-menu. If automatic detection fails, this may
be because the hard disk drive is too old or too new. If the hard disk was
already formatted on an older system, Setup may detect incorrect
parameters. In these cases, select [User Type HDD] to manually enter the
IDE hard disk drive parameters. Refer to the next section for details.
Before attempting to configure a hard disk drive, make sure you have
the correct configuration information supplied by the drive
manufacturer. Incorrect settings may cause the system to fail to
recognize the installed hard disk.

Asus P4S533 Specifications

General

Form Factor	ATX
Socket Type	Socket 478
Chipset	SiS 645
Supported CPUs	Intel Pentium 4
Memory Slots	3
Maximum Memory	3 GB
Supported Memory Types	DDR SDRAM
USB Ports	6
AGP	4x AGP
Onboard Audio	AC'97
USB Version	1.1
IDE	2 x IDE
Memory Types	DDR266
Expansion Slots	5 PCI, 1 AGP