Asus P4S533 User Manual

ASUS P4S533 motherboard user guide 75
4.5.1 Power Up Control
AC PWR Loss Restart [Disabled]
This allows you to set whether or not to reboot the system after power
interruptions. [Disabled] leaves your system off while [Enabled] reboots the
system. [Previous State] sets the system back to the state it was before
the power interruption. Configuration options: [Disabled] [Enabled]
[Previous State]
Wake/Power Up On Ext. Modem [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the
computer when the external modem receives a call while the computer is
in Soft-off mode. Configuration options: [Disabled] [Enabled]
The computer cannot receive or transmit data until the computer and
applications are fully running. Thus, connection cannot be made on the
first try. Turning an external modem off and then back on while the
computer is off causes an initialization string that turns the system
power on.
Power Up On PCI Card [Disabled]
When set to [Enabled], this parameter allows you to turn on the system
through a PCI modem. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead. Configuration options: [Disabled]
[Enabled]

Asus P4S533 Specifications

General

Form Factor	ATX
Socket Type	Socket 478
Chipset	SiS 645
Supported CPUs	Intel Pentium 4
Memory Slots	3
Maximum Memory	3 GB
Supported Memory Types	DDR SDRAM
USB Ports	6
AGP	4x AGP
Onboard Audio	AC'97
USB Version	1.1
IDE	2 x IDE
Memory Types	DDR266
Expansion Slots	5 PCI, 1 AGP