Asus P5BV-M - Page 29

ASUS P5BV-M 2-9
3. Connect the CPU fan cable to the connector on the motherboard labeled
CPU_FAN1.
2. Push down two fasteners at a
time in a diagonal sequence
to secure the heatsink and fan
assembly in place.
A
A
B
B
• Do not forget to connect the CPU fan connector! Hardware monitoring
errors can occur if you fail to plug this connector.
• If there is only one CPU fan cable, connect it to the connector labeled CPU
FAN1. Failure to do so may cause hardware monitoring errors. Set the CPU
fan pin selection jumper to use a 3-pin or 4-pin fan cable plug. Refer to “2.6
Jumpers” for details.
A
A
B
B
1
1
P5BV-M CPU Fan Connector
®
P5BV-M
GND
FANPWR2
CPU_FAN1
FAN PWM