Asus P5G-MX - CPU Power and Chipset Settings

2-20 Chapter 2: BIOS setup
Enhanced C1 Control [Auto]
When set to [Auto], the BIOS will automatically check the CPU’s capability to
enable the C1E support. In C1E mode, the CPU power consumption is lower when
idle. Conguration options: [Auto] [Disabled]
CPU Internal Thermal Control [Auto]
Disables or sets the CPU internal thermal control.
Conguration options: [Auto] [Disabled]
Virtualization Technology [Enabled]
Allows you to enable or disable the processor Virtualization Technology.
Conguration options: [Disabled] [Enabled]
The following item appears only when you installed an Intel
®
Core™ 2 Duo
and later processors that supports the Enhanced Intel SpeedStep
®
Technology
(EIST).
Intel(R) SpeedStep(TM) tech [Enabled]
Allows you to use the Enhanced Intel SpeedStep
®
Technology. When set to
[Enabled], you can adjust the system power settings in the operating system to use
the EIST feature.
Set this item to [Disabled] if you do not want to use the EIST.
Conguration options: [Enabled] [Disabled]
2.4.3 Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an
item then press <Enter> to display the sub-menu.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Advanced Chipset Settings
DRAM Frequency [Auto]
Congure DRAM Timing by SPD [Enabled]
Hyper Path 3 [Auto]
DRAM Throttling Threshold [Auto]
Boot Graphic Adapter Priority [PCI Express/Int-VG]
Internal Graphics Mode Select [Enabled, 8MB]
Graphics memory type [Auto]
Boot Display Device [Auto]
TV Connector [Auto]
HDTV Output [Auto]
TV Standard [VBIOS-Default]
PEG Buffer Length [Auto]
Link Latency [Auto]
PEG Root Control [Auto]
Slot Power [Auto]
High Priority Port Select [Disabled]
Manual DRAM Frequency
SettingorAuto by SPD