2-32 Kapitel 2: BIOS-Setup
2.6.1 Bootgerätepriorität
1st ~ xxth Boot Device [1st Floppy Drive]
Diese Elemente bestimmen die Bootgerätepriorität der verfügbaren Geräte.
Die Anzahl der auf diesem Bildschirm angezeigten Geräte hängt von der
Anzahl der in diesem System installierten Geräte ab.
Konfi gurationsoptionen: [xxxxx Drive] [Disabled]
Boot Device Priority
1st Boot Device [1st FLOPPY DRIVE]
2nd Boot Device [PM-ST330620A]
3rd Boot Device [PS-ASUS CD-S360]
2.6.3 Booteinstellungskonfi guration
Boot Settings Confi guration
Quick Boot [Enabled]
Full Screen Logo [Enabled]
AddOn ROM Display Mode [Force BIOS]
Bootup Num-Lock [On]
PS/2 Mouse Support [Auto]
Wait For ‘F1’ If Error [Enabled]
Hit ‘DEL’ Message Display [Enabled]
Interrupt 19 Capture [Disabled]
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
Quick Boot [Enabled]
Diese Funktion beschleunigt den Start des Systems, indem manche
Einschaltselbsttests (POST) ausgelassen werden. Das BIOS führt alle POST-
Elemente aus, wenn [Disabled] gewählt wurde.
Konfi gurationsoptionen: [Disabled] [Enabled]
2.6.2 Festplatten
1st ~ xxth Drive [XXXXXX]
Diese Elemente legen die Bootsequenz der verfügbaren Festplatten
fest. Die Anzahl der angezeigten Festplatten hängt von der Anzahl der
installierten Festplatten ab. Konfi gurationsoptionen: [XXXXXXX] [Disabled]
Hard Disk Drives
1st Drive [XXXXXXXXX]
2nd Drive [XXXXXXXXX]