1-8 Chapter 1: Product introduction
To prevent damage to the socket pins,
do not remove the PnP cap unless
you are installing a CPU.
2. Press the load lever with your thumb
(A), then move it to the left (B) until it is
released from the retention tab.
A
B
Load lever
Retention tab
3. Lift the load lever in the direction of the
arrow to a 135º angle.
4. Lift the load plate with your thumb and
forenger to a 100º angle (4A), then
push the PnP cap from the load plate
window to remove (4B).
Load plate
PnP cap
4A
4B
3
1.6.1 Installing the CPU
To install a CPU:
1. Locate the CPU socket on the motherboard.
To Next Page
Loading...
