Asus P5LD2 SE - 4.5 BIOS Power Management Settings

4-30 Chapter 4: BIOS setup
4.5 Power menu
The Power menu items allow you to change the settings for the ACPI and
Advanced Power Management (APM) features. Select an item then press
<Enter> to display the conguration options.
4.5.1 Suspend Mode [Auto]
Allows you to select the Advanced Conguration and Power Interface
(ACPI) state to be used for system suspend.
Conguration options: [S1 (POS) Only] [S3 Only] [Auto]
4.5.2 Repost Video on S3 Resume [No]
Determines whether to invoke VGA BIOS POST on S3/STR resume.
Conguration options: [Yes] [No]
4.5.3 ACPI 2.0 Support [No]
Allows you to add more tables for Advanced Conguration and Power
Interface (ACPI) 2.0 specications. Conguration options: [No] [Yes]
4.5.4 ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Programmable Interrupt
Controller (APIC) mode under Advanced Conguration and Power Interface
(ACPI). When enabled, the ACPI APIC table pointer is included in the RSDT
pointer list. Conguration options: [Disabled] [Enabled]
Suspend Mode [Auto]
Repost Video on S3 Resume [No]
ACPI 2.0 Support [No]
ACPI APIC Support [Enabled]
APM Conguration
Hardware Monitor
Select the ACPI state
used for System
Suspend.